Common Problems of Badminton Racket & How to Fix Them

Most players strive to have the best badminton racket in the world. However, that doesn’t give them immunity against common racket problems.

A large number of novice players are the ones that suffer the most issues with badminton rackets. In most cases, improving your skills and adhering to proper racket maintenance[how to maintain badminton racket] will see you avoid many problems.

So here are the usual racquet problems and how you can fix each of them.

Common Problems with Badminton Rackets and How to Fix Them

Inadequate Racquet Power

Of all the issues players face with a badminton racket, inadequate power tops the list. Nevertheless, you can increase the power of a racquet through any of the following ways;

Decreasing the String Tension

The tension of the strings significantly affects the energy a racquet imparts to the shuttlecock. High tension strings flex very little and thus produce less powerful shots.

On the other hand, low tension strings flex at high depth and hence impart more energy. Therefore reducing the tension of the string softens it and thus bestowing power in your shots.

Boosting the Weight on the Head

Besides altering the string tension, the balancing point of the badminton racket[understanding the balance point of badminton racket] influences its power ability. A head-heavy racquet generates far-reaching shots than its head-light counterparts. The increased weight on the head gives the shuttlecock high momentum.

One way of enhancing the weight on the head is through the use of tungsten or lead tape. You only have to add few turns of the lead tape at the 12-noon position. An addition of a few more grams on the racket head can significantly alter the power level.

Difficulty in Maneuvering a Racket

The most probable cause of maneuverability issues is a weight problem. A racket with significant weight on the head is slightly demanding to turn or move quickly.

One solution for the problem is to go for the head-light racquet. That is the racquet whose balance point is at the handle or below 285mm from the base.

Another way of reducing the swing weight is by using thin strings. Therefore, you need to choose a brand new racket with thin threads. Alternatively, you can remove the existing thick cords and then restring the equipment with thin lines.

Lack of Stability

In most cases, the lack of stability stems from your insufficient badminton playing skills. If you need to enjoy stability in your shots, you have to get the timing of the shuttlecock right.

At the same time, you must aim at hitting the shuttlecock every time from the sweet spot. Also, adding some lead tape at the 9 and 3 positions and hence increasing the twist weight helps. Further, you can also try switching your existing racket for a heavier model.

Poor Control

Poor control of the shuttlecock is another widespread racket problem. One suggested solution is to use the correct type of string that enhances control. For example, polyester material is one suitable candidate.

After changing the type of string, then increase the tension too. A high tension string reduces power but boosts your control ability. However, you have to hit the small sweet spot of the equipment consistently.

Conclusion

The above forms the most widespread problems badminton players often face with badminton racquets. Besides the mentioned issues, it’s vital to take utmost care and store your racquet properly. Doing so keeps all the badminton racquet parts[parts of a badminton racket]in their optimum performance state and prolongs their life.

Leave a Reply

Your email address will not be published. Required fields are marked *